Rammy ATV Brush Cutter

Cut grass, brush, saplings, and even small trees up to 4 inch in diameter with your ATV or UTV without having to run them over first! The Rammy ATV Brush Cutter 120 attachment is a front mounted cutter that is easy to install, use, and maintain. Manufactured in Finland with top quality components, Rammy is a Pioneer in high quality, functional ATV attachments.

The Brush Cutter includes a universally adjustable subframe that will attach to almost any snowplow mount bracket, as long as that bracket utilizes 10mm / 3/8″ pins to attach. This subframe is adjustable telescopically in and out, and it has adjustable L bracket ears to fit most plow mounts. This subframe then bolts onto the Rammy attachment. If your machine has 16mm, 19mm, or 20mm mounting posts, you can add the optional Rammy Lock / Hook Set for easy attachment.

Important Notes

A universal or model specific snowplow mount bracket is required to attach the Rammy to your machine. If you already have a snow plow bracket installed, the Rammy may attach right to it! The subframe (or push tube) is included with the Rammy, but the mount bracket is not. We do not sell mount brackets, but have had good success using KFI Products vehicle-specific snow plow mount brackets.
A winch is required to raise and lower the Rammy. You will require a vehicle specific winch, so we recommend working with the nearest dealer for your brand of ATV / UTV for the best solution.
Rammy attachments add a substantial amount of weight to the front of your ATV / UTV (see tech specs). We recommend at the minimum a 570CC ATV / UTV to use with a Rammy – but all ATV’s / UTV’s vary. Make sure that your front suspension is strong enough to handle the additional weight of a Rammy. We also recommend using about 100lb of ballast weight on the rear of your ATV / UTV to help keep things level.
For best results, we recommend installing the subframe onto your ATV / UTV first, then bolt the Rammy to the subframe while both the vehicle, and the Rammy are on the same level surface.
Shown below is the Flail Mower diagram for reference. The subframe included with the Brush Cutter is the same.

Installation

After your initial installation and setup with the subframe, detaching and reattaching the Rammy is done in a matter of minutes! This means that your ATV / UTV can easily be used for other activities quickly and easily when you are are not using the Rammy. The Rammy Brush Cutter 120 can cut grass, thistle, saplings, and even small trees – up to 4 inch in diameter!

Briggs and Stratton 344cc Intek engine
- 10.5HP / 17.5 gross torque
- Cartridge style air filtration
- Spin-on oil filter with lower crank bearing pressure lubrication
- Square “Lo-Tone” muffler with deflector
Three spindles with grease fittings on top and bottom of each
- Each spindle has two double-edged flailing blades
- Optional lawn mower kit available for fine grass cutting results
Cut up to 4″ diameter max (single tree up to 4 inch diameter)
Adjustable, multi-position rear roller – *This is the height-of-cut adjustment point
Spring-loaded flip-up blade guard
Heavy duty push bar to direct cut brush / trees away from the operator
Included side shift allows mower to slide up to 12.5 inches to the left or right side of the ATV / UTV
- Note that once the position is selected, the Brush Cutter is bolted into place on the bracket
  - See the photos section for a diagram of side shift setup
2 year warranty on Rammy machine – *Does not include belts, blades, or bearings
2 year warranty on Briggs & Stratton engine – *Does not include fuel related issues

Whether you need to maintain overgrown fields, trails, or just mow your lawn, the Rammy Brushcutter 120 is a versatile attachment that is easy to install, use, and maintain. Invest in a high-quality, made in Finland ATV attachment that is backed by Wolfe Ridge in North America!

Tech Specs

Briggs & Stratton 344cc 10.5 HP gas engine with pull start
Belt driven – 2x matched belt set pairs
47.25″ overall width
45.25″ cutting width
6 flailing cutter blades – 2 on each spindle disc
1″ – 3″ height of cut adjustment via rear roller adjustment
- Higher height of cut if raised with winch – as much as your vehicle suspension allows
Cut up to 4″ diameter max (if single tree)
Universal adjustable 2-pipe subframe (pushtube) included
Brushcutter weight: 200 LB
Subframe weight: 55 LB
Total attachment weight (Brushcutter + Subframe): 255 LB

Find a Rammy Dealer Near You

Rammy dealers are well-versed in the machines, and how all of the mounting systems work. These dealers also offer installation of the Rammy products – for an additional service fee. This fee varies depending on your machine, and whether or not you would need additional parts, such as a winch or mount bracket, in order to install the machine. Please visit our North American Rammy dealer locator HERE.

Shipping

Rammy machines ship via LTL, on a pallet. If a semi truck can get to your address, we can arrange a shipment with liftgate service. Freight price is usually between $500-$800 in the US, and a bit higher in Canada. For a freight quote, please fill out the form at the bottom of this page with your full ship-to address. To save some freight, and possibly lead time, we recommend contacting the Rammy dealer closest to you. Please visit our North American Rammy dealer locator HERE.

**IMPORTANT SHIPPING NOTES**

If you order a machine and do not opt for liftgate service, you will need a forklift or skid steer / loader / tractor with forks for unloading. These machines are not able to be unloaded by hand!
If you order liftgate service, the truck will unload your machine at the end of your driveway closest to the road. Semi truck / trailers will not typically drive on residential driveways so please keep this in mind.
We can also offer “terminal pickup” for your machine, so you would go to the nearest freight terminal to pick it up. In that case, the shipping company would load your crated machine onto a trailer on into the bed of your truck. Note that the crate size is 48″L x 32″W x 42″H.